180
Switch administration tasks
default autotopology command
The
default autotopology
command enables the Autotopology
protocol.
The syntax for the
default autotopology
command is
default autotopology
Run the
default autotopology
command in Global Configuration
command mode.
The
default autotopology
command has no parameters or values.
show autotopology settings command
The
show autotopology settings
command displays the global
autotopology settings.
The syntax for the
show autotopology settings
command is
show autotopology settings
Run the
show autotopology settings
command in Privileged EXEC
command mode.
The
show autotopology settings
command has no parameters or
values.
show autotoplogy nmm-table command
The
show autotopology nmm-table
displays the Autotopology network
management module (NMM) table.
The syntax for the
show autotopology nmm-table
command is
show autotopology nmm-table
Run the
show autotopology nmm-table
command in Privileged EXEC
command mode.
The
show autotopology nmm-table
command has no parameters or
values.
Enabling flow control
Gigabit Ethernet, when used with the Nortel Ethernet Routing Switch 4500
Series, can control traffic on this port using the
flowcontrol
command.
Note: Due to Quality of Service (QoS) interaction, the Ethernet Routing
Switch 4500 cannot send pause-frames.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500
02.01
Standard
5.0
23 February 2007
Copyright © 2007, Nortel Networks
Nortel Networks Confidential
.
