Nortel 425 series Скачать руководство пользователя страница 86

Страница: 86 / 526

Configuring the domain

Use existing certificate (no/1) [no]:

Create a test certificate?

(yes/no):

Enter server certificate.

Paste the certificate and key, press Enter to create a

new line, and then type "..." (without the quotation

marks) to terminate.

To create a test certificate:

At the prompt to create a test certificate, enter

Yes

b When prompted, enter the required certificate information.

For more information, see

“Generating and submitting a CSR”

(page 305)

To continue, go to

Step 8

Use existing certificate (no/1) [no]:

Create a test certificate?

(yes/no):

yes

The combined length of the following parameters may not

exceed 225 bytes.

Country Name (2 letter code):

State or Province Name (full name):

Locality Name (eg, city):

Organization Name (eg, company):

Organizational Unit Name (eg, section):

Common Name (eg, your name or your server’s hostname):

Email Address:

Subject alternative name (blank or comma separated

list of URI:<uri>, DNS:<fqdn>, IP:<ip-address>,

email:<email-address>):

Valid for days [365]:

Key size (512/1024/2048/4096) [1024]:

Specify whether the SSL server uses chain certificates.

Do you require chain certificates (yes/no) [no]:

If you want to enable HTTP to HTTPS redirection, create a
redirect server.

Do you want an http to https redirect server (yes/no)

[no]:

Specify whether you want to add a network access devices to
the domain.

Do you want to configure a switch?

(yes/no) [no]:

If you do want to add a network access devices, enter

yes

launch the quick switch wizard. Go to

step 11

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Содержание 425 series





































































































































































































































































































































































































































































































































Результаты поиска

Содержание 425 series

Отзывы:

Nortel 425 series, Руководство CLI, Страница: 86 / 526

Результаты поиска

Содержание 425 series

Отзывы: