Nortel 425 series Скачать руководство пользователя страница 251

Страница: 251 / 526

Customizing the portal and logon

251

/cfg/doamin #/portal/content

followed by:

export <protocol> <server>

<filename>

Exports a content file (in ZIP format)
from the portal to the specified
TFTP/FTP/SCP/SFTP file exchange
server.

•

protocol

is the export protocol.

Options are

tftp|ftp|scp|sftp

•

server

is the host name or IP address

of the server

•

filename

is the name of the content

file (.zip)

delete

Deletes all uploaded content from the
portal.

available

Shows remaining memory space available
for custom content, in kilobytes (KB).

ena

Enables client access to custom content.

The default is disabled.

dis

Disables client access to custom content.

Configuring linksets

A linkset is a set of links that display on the portal Home tab. For more
information about linksets and links, see

“Linksets and links” (page 234)

To create and configure a linkset, use the following command:

/cfg/doamin #/linkset <linkset ID>

where

linkset ID

is an integer in the range 1 to 1024 that

uniquely identifies the linkset in the Nortel
SNAS domain.

ATTENTION

If you ran the quick setup wizard during initial setup, two linksets have been
created:

nha_passed

(linkset ID = 1) and

nha_failed

(linkset ID = 2). The

linksets are empty.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Содержание 425 series





































































































































































































































































































































































































































































































































Результаты поиска

Содержание 425 series

Отзывы:

Nortel 425 series, Руководство CLI, Страница: 251 / 526

Результаты поиска

Содержание 425 series

Отзывы: