Nortel 425 series Скачать руководство пользователя страница 477

Страница: 477 / 526

477

Appendix
Supported MIBs

This appendix describes the Management Information Bases (MIB) and
traps supported by the Nortel SNAS.

•

“Supported MIBs” (page 477)

•

“Supported traps” (page 481)

For detailed information about the MIB definitions currently implemented
for the SNMP agent, do the following:

Step

Action

Go to

http://www.nortel.com/support

Navigate to the Nortel SNAS Software page.

Download the tar.gz file for the Nortel SNAS MIBs.

Unzip the .tar file in order to access the file ALTEON-SAC-CA
P.mib.

ALTEON-SAC-CAP.mib contains an AGENT-CAPABILITIES
statement, which formally specifies which MIBs are implemented.

--End--

For information about configuring the SNMP agent in a cluster, see

“Configuring SNMP” (page 323)

Supported MIBs

The following MIBs are supported by the Nortel SNAS:

•

ALTEON-ISD-PLATFORM-MIB

•

ALTEON-ISD-SSL-MIB

•

ALTEON-ROOT-MIB

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Содержание 425 series





































































































































































































































































































































































































































































































































Результаты поиска

Содержание 425 series

Отзывы:

Nortel 425 series, Руководство CLI, Страница: 477 / 526

Результаты поиска

Содержание 425 series

Отзывы: