Nortel 120 Скачать руководство пользователя | Manualshive

Страница: 113 / 130

background image

Regulatory compliances

113

Marking by the preceding symbol indicates compliance with the Essential
Requirements of the R and TTE Directive of the European Union
(1999/5/EC). This equipment meets the following conformance standards:

•

EN 60950-1 (IEC 60950-1) - Product Safety

•

EN 301 893 - Technical requirements for 5 GHz radio equipment

•

EN 300 328 - Technical requirements for 2.4 GHz radio equipment

•

EN 301 489-1 / EN 301 489-17 - EMC requirements for radio equipment

Countries of Operation and Conditions of Use in the European
Community

This device is intended to be operated in all countries of the European
Community. Requirements for indoor vs. outdoor operation, license
requirements and allowed channels of operation apply in some countries
as described below:

Note: The user must use the configuration utility provided with this
product to ensure the channels of operation are in conformance with the
spectrum usage rules for European Community countries as described
below.

•

This device requires that the user or installer properly enter the current
country of operation in the command line interface as described in the
user guide, before operating this device.

•

This device will automatically limit the allowable channels determined
by the current country of operation. Incorrectly entering the country
of operation may result in illegal operation and may cause harmful
interference to other systems. The user is obligated to ensure the
device is operating according to the channel limitations, indoor/outdoor
restrictions and license requirements for each European Community
country as described in this document.

•

This device employs a radar detection feature required for European
Community operation in the 5 GHz band. This feature is automatically
enabled when the country of operation is correctly configured for any
European Community country. The presence of nearby radar operation
may result in temporary interruption of operation of this device. The
radar detection feature will automatically restart operation on a channel
free of radar.

•

The 5 GHz Turbo Mode feature is not allowed for operation in any
European Community country. The current setting for this feature is
found in the 5 GHz 802.11a Radio Settings Window as described in
the user guide.

•

The 5 GHz radio’s Auto Channel Select setting described in the user
guide must always remain enabled to ensure that automatic 5 GHz

BAP120

Using the Nortel Business Access Point 120

NN47921-301

01.01

Standard

1.0

August 2006

Copyright © 2006, Nortel Networks

Nortel Networks Confidential

.

«
...
111
112
113
114
115
...
»

Содержание 120



































































































































Отзывы:

Нет отзывов

Похожие инструкции для 120

Бренд: Qongle Страницы: 13

Бренд: Abocom Страницы: 2

Бренд: H3C Страницы: 37

Бренд: H3C Страницы: 41

Бренд: Laird Страницы: 24

Бренд: Laird Страницы: 6

Бренд: NetComm Страницы: 3

Бренд: Ebyte Страницы: 11

Бренд: EnGenius Страницы: 73

Бренд: One Touch Страницы: 12

Бренд: LevelOne Страницы: 31

TL-WR340G - Wireless Router

Бренд: TP-Link Страницы: 2

Бренд: TP-Link Страницы: 70

54Mbps Wireless Access Point TL-WA501G

Бренд: TP-Link Страницы: 43

Бренд: TP-Link Страницы: 55

Бренд: ActionTec Страницы: 2

Бренд: Draytek Страницы: 127

Бренд: Steren Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды