Nortel 120 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 130

Nortel 120 Скачать руководство пользователя страница 58

58

System configuration management

Note: Before enabling VLAN tagging on the access point, be sure to
configure the attached network switch port to support tagged VLAN
frames from the access point management VLAN ID, default VLAN IDs,
and other client VLAN IDs. Otherwise, connectivity to the access point
is lost when you enable the VLAN feature.

Using IEEE 802.1X and a central RADIUS server, up to 64 VLAN IDs can
be mapped to specific wireless clients, so users can remain within the same
VLAN as they move around a campus site. This feature can also be used to
control access to network resources from clients, thereby improving security.

A VLAN ID (1-4094) can be assigned to a client after successful IEEE
802.1X authentication. The client VLAN IDs must be configured on the
RADIUS server for each user authorized to access the network. If a client
does not have a configured VLAN ID on the RADIUS server, the access point
assigns the client to the configured default VLAN ID for the VAP interface.

Note: When using IEEE 802.1X to dynamically assign VLAN IDs, the
access point must have 802.1X authentication enabled and a RADIUS
server configured. Wireless clients must also support 802.1X client
software.

When setting up VLAN IDs for each user on the RADIUS server, be sure to
use the RADIUS attributes and values as indicated in the following table:

RADIUS attributes and values

Number

RADIUS attribute

Value

64

Tunnel-Type

VLAN (13)

65

Tunnel-Medium-Type

802

81

Tunnel-Private-Group-ID

VLANID(1 to 4094 as
hexadecimal or string)

VLAN IDs on the RADIUS server can be entered as hexadecimal digits
or a string.

Note: The specific configuration of RADIUS server software is beyond
the scope of this guide. For more information, see the documentation
provided with the RADIUS server software.

BAP120

Using the Nortel Business Access Point 120

NN47921-301

01.01

Standard

1.0

August 2006

Copyright © 2006, Nortel Networks

Nortel Networks Confidential

.

«
...
56
57
58
59
60
...
»

Содержание 120



































































































































Отзывы:

Нет отзывов