Nortech Security NANOQUEST, Руководство пользователя

Страница: 18 / 35

NANOQUEST USER GUIDE
Issue 02
4-2
personnel gaining access through the unlocked door after an authorised person has entered.
The procedure for setting the strike time is as follows:
Description Action
Indication Final State
1) Enter ‘Relay Strike Time’ mode
by presenting the Master nine
times.
The LED blinks green and the
unit beeps twice to indicate
programming mode has been
entered successfully. The LED
then blink green once and the
unit beeps once on the second
and subsequent presentations.
The LED repeat a sequence
of 9 red flashes followed by a
pause to indicate Mode 9.
x9
First presentation:
x1 x2
Second and subsequent
presentations:
x1 x1
x9
Followed by a pause.
Sequence is repeated.
2) Present a valid User or
Auxiliary card once for each
second of Door Open (Strike)
Time required (up to 10).
If the card is shown an 11th
time, the strike time is set to
500ms.
If the card is shown a 12th
time, ‘Toggle Lock’ Mode is
selected
(see explanation below).
xt
t =
required strike time
in seconds
For each card
presentation:
x1 x1
xt
Followed by a pause.
Sequence is repeated.
3) Present the original Master
card to exit programming
mode.
x1 x2
(Operating mode)
While in ‘Relay Strike Time’’ mode , if you do not present any cards for a period of thirty seconds, the
NanoQuest will exit programming mode and return to normal operation.
Using Door Open (Strike) in Toggle Lock Mode 4.1.1.
With the NanoQuest configured to operate in toggle lock mode, a locked door will be unlocked when
a valid User or Auxiliary card is presented. The door will then remain unlocked until a valid User or
Auxiliary card is presented again to re-lock it. An example application for this feature is to unlock the
door first thing in the morning using a valid card, allowing others free access to the controlled area
during office hours. The door can then be locked at the end of the day using a valid card, thereby
preventing unauthorised personnel from accessing the controlled area after hours.
Note :
Toggle Lock mode affects the way that both the ‘Request to Exit’ and the ‘Door Monitoring’
features operate. Read the appropriate section carefully if you intend to use this mode.