NANOQUEST USER GUIDE
Issue 02
3-3
Adding User Cards
3.4
Each proximity card supplied with the NanoQuest carries a unique identity number. For a card to
function as a User card at the NanoQuest, its identity must be either individually ‘learnt’ into the
NanoQuest as as a User card or added as part of a batch of User cards using a batch card.
You can add as many User cards as you need to the system at one time by presenting each card
individually while the NanoQuest is in “Add User Card” mode. We recommend that you add new User
cards only when they are required. This avoids the risk of loss or theft of valid User cards from stock.
If you have a batch card and you wish to add the full batch of cards at the same time, you simply
need to present the batch card to the NanoQuest while it is in “Add User Card” mode.
The procedure for adding User cards is as follows:
Description
Action
Indication
Final State
1) Enter ‘Add User Card’ mode
by presenting the Master card
once.
The LED blinks green and the
unit beeps twice to indicate
programming mode has been
entered successfully.
The LED flashes red regularly
to indicate Mode 1
x1
x2
x1
Followed by a pause.
Sequence is repeated.
2)
Adding Individual Cards
Present a card not currently
added on the system.
The LED blinks green and the
unit beeps to signify that the
card has been successfully
added as a User card.
Repeat this step for each
additional card.
x1
x1
As above
2)
Adding a Batch of Cards
Present the batch card.
The LED glows green while the
cards are being added. The
unit beeps when all cards have
been added.
As above
As above
3) Present the Master card at
any time to exit programming
mode.
x1
x2
(Operating mode)
