50
51
Des altérations au service du progrès technologique ainsi que des erreurs sauf!
NOTICE ORIGINALE
NORSUP
WWW.NORSUP.EU
Des altérations au service du progrès technologique ainsi que des erreurs sauf!
NETTOYEUR DE PISCINE TYPE CYCLONE
NETTOYEUR DE PISCINE TYPE CYCLONE
12. CHARIOT “TROLLY” (EN OPTION)
12.1. OVERVIEW
Le chariot est un accessoire en option qui facilite le
déplacer du robot nettoyeur et qui offre un espace
de montage du le module de commande et
d’alimentation.
12.1. MONTAGE DU CHARIOT
1. Fixez les roues des deux côtés de la base du
chariot.
2. Fixez chaque roue avec la vis et installez le
couvercle.
3. Montez les deux parties de la poignée.
4. Insérez la poignée dans la base de chariot.Faites
cliquer les pattes inférieures du boîtier du module
de commande et d’alimentation dans la base de
chariot.
5. Fixez le support de la télécommande en insérant la
partie supérieure dans la poignée du chariot et en
la faisant tourner vers le bas jusqu‘à ce qu’un clic se
fasse entendre dans la partie inférieure.
6. Placez le câble du module de commande et
d’alimentation dans la rainure de la base de
chariot.
7. Fixez le boîtier du module de commande et
d’alimentation en faisant cliquer les pattes
supérieures dans les trous de la poignée.
8. Placez la partie supérieure du module de
commande et d’alimentation dans le boîtier et
poussez la partie inférieure vers le bas jusqu‘à ce
qu‘un clic se entendre dans la base de chariot.
Trolly (optional)
1
2
3
The trolly is an optional accessory that makes it easy to move the robotic
cleaner and provides a mounting site for the power and control unit.
To assemble the trolly:
1. Attach the wheels to both sides of the trolly base and fasten each
wheel with the screw and install the cover.
2. Assemble the two sections of the handle.
3. Attach the power and control unit housing by clicking the upper tabs
into the holes in the handle.
Assembly Diagram
Parts
15
Trolly (optional)
1
2
3
The trolly is an optional accessory that makes it easy to move the robotic
cleaner and provides a mounting site for the power and control unit.
To assemble the trolly:
1. Attach the wheels to both sides of the trolly base and fasten each
wheel with the screw and install the cover.
2. Assemble the two sections of the handle.
3. Attach the power and control unit housing by clicking the upper tabs
into the holes in the handle.
Assembly Diagram
Parts
15
5
6
7
8
4
4. Insert the handle into the trolly
base. Click the lower tabs of the
power and control unit housing
into the trolly base.
5. Attach the remote control holder
by inserting the upper part into
the trolly handle and turning the
holder downward until the lower
part clicks.
6. Attach the cable of the power
supply
7. Place the power and control unit
cable in the groove in the trolly
base.
8. Place the upper part of the
power and control unit in the
housing and push the lower part
downward until it clicks into the
trolly base.
Trolly (optional)
16
REMARQUES