Norland Elite 437A150 Скачать руководство пользователя страница 490 | Manualshive

Страница: 490 / 490

Norland Elite 437A150 Скачать руководство пользователя страница 490

Operator's Guide
437D140 Rev. I

Quick Reference -
System Backup with EaseUS Todo Backup

Norland recommends that system backups be performed regularly for the patient scan data and calibration
data. Two USB flash drives are supplied from Norland.

All computers supplied by Norland are set up to automatically perform a backup of the IlluminatusDXA software
and data on a daily schedule. The computer must be turned on, and a USB flash drive must be connected to the
computer for the backup to complete successfully on schedule. The automated backup requires no user inter-
vention if the backup drive is available and the schedule is allowed to run.

Note:

This procedure applies to using the EaseUS Todo Backup v9.x program. This process does not

apply to any other versions of Windows. To configure the backup, refer to "Configuring Backup for Win-
dows 10" on page 3-5.

TO BEGIN THE SYSTEM BACK-UP MANUALLY:

Exit the Illuminatus software to the Windows desktop.

Insert the USB flash drive into one of the USB ports.

Run the EaseUS Todo Backup program.

Next to the Norland Backup job, click Backup. Select Full Backup to begin.

The backup progress will be displayed while the backup is being performed.

When the backup is complete, the “Last Backup” date and time will be updated and the progress bar will dis-
appear.

The USB drive should remain plugged into the computer for the backup to run automatically on schedule. If
the drive must be removed, select “Safely Remove Hardware and Eject Media” from the Windows system
tray. Click on “Eject Mass Storage” for the flash drive. Wait until the “Safe to Remove Hardware” message is
displayed. Remove the flash drive from the USB port and store in a safe place.

«
...
488
489
490

Содержание Elite 437A150











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды