Norland Elite 437A150 Скачать руководство пользователя страница 418

Страница: 418 / 490

2. Type in the

Number of Scans

to be performed (6 is used in this example) and click

3. Turn on the laser.

Caution:

Do not stare into the beam.

4. Place the black QC Phantom on the scanner table in the marked location. The “C” on the box should be ori-

entated to the right side of the table (operator facing the table). Position the Phantom parallel to the back rest.

Marking the QC Phantom

1. Use the arrow buttons to move the scanner arm so that the laser positioning dot is on the dot marked C on

the QC Phantom (see figure below).

2. Verify the Phantom is straight by using the arrow buttons to move the laser to the dot marked D. Re-position

the Phantom if it is not straight. Move the laser back to the dot marked C.

3. Press

to mark point C.

4. As soon as the Phantom is positioned and marked, an Alert dialog box pops up. Wait while the source ramps

up. The dialog box will automatically close when the X-ray source is ready.

5. The scan will begin automatically. The window will display the scan image as it develops and update the

status of the scan.

6. At completion, an audible indicator will sound, indicating that the shutter has closed and the x-ray beam is no

longer present. The results will be displayed in the QA Results tab window.

Operator's Guide

437D140 Rev. I

15-6

General Maintenance

Содержание Elite 437A150











































































































































































































































































































































































































































































































Результаты поиска

Содержание Elite 437A150

Отзывы:

Бренды по названию

Популярные бренды

Norland Elite 437A150, Руководство оператора

Результаты поиска

Содержание Elite 437A150

Отзывы:

Бренды по названию

Популярные бренды