Nordson Spectrum VT Feed Center, Руководство по эксплуатации продукта

Страница: 38 / 105

Operation
4-10
Part 1611362 − 01
E 2018 Nordson Corporation
Prepare for Hopper Purge
See Figure 4-7.
The system will begin to purge the automatic spray guns.
1. Remove the pick-up tube from the box and blow it off.
2. Place the pick-up tube in the holder.
3. Move the powder box onto the vibratory table beneath the hopper.
4. Select the check mark when the spray guns are purged and the
previous steps are completed.
NOTE: Long pick-up tubes are used in conjunction with a Nordson
drum unloader or other third party bulk unloading systems. Short
pick-up tubes are intended for use with boxes of powder or other user
supplied bins on the integrated vibratory table. For a drum unloader,
remove both pick-up tubes, blow them off, and secure them in their
respective holders. Then, a customer-supplied bin should be placed on
the vibratory table beneath the hopper.
Figure 4-7 Prepare for Hopper Purge