Operation
4‐2
Part 7192568-03
E
2020 Nordson Corporation
Controls - Stand Alone (Home Screen)
7
6
1
2
3
4
5
8
9
10
11
12
13
Main Operation Touch Screen
Item
Element
Function
1
Home
Press this on any screen to bring you back to this Home screen
2
Lights
Switches the lights On and Off
3
Alarm List
This will display any alarms logged. The alarm can be silenced here.
4
Colour Change
Initiates the colour change sequence. Follow the onscreen instructions.
5
Exit
Press this on any screen to go back to the previous screen
6
Sieve On/Off
Square highlighted Green means Sieve is On, Grey means Sieve is Off
7
Sieve Error
Square highlighted Red means there is a fault, Grey means no error
8
Configuration
Brings the operator to the configuration screen. Only trained operators or
maintenance staff should use this screen. A password is required for ac
cess to this screen.
9
HDLV Reclaim Powder
Enables the reclaim feed depending on the powder level inside the
hopper. When activated, this pump will always run unless the top level
probe is reached/covered.
10
Manual Mode
Turns off the automatic running function and allows individual elements
of the SHD to be controlled manually.
11
Duct Valve Override
Toggles between normal running and maximum extract in the SHD
12
Powder Level
Indicates the current powder level in accordance to the 3 level probes
13
HDLV Fresh Powder
Enables the fresh powder feed depending on the powder level inside the
hopper. If the low or mid level sensor is clear of powder, the pump will
start with an adjustable delay. If the sensor gets covered the pump will
stop, also with an adjustable delay
