Nordson MicroMax 1, Руководство пользователя

Страница: 36 / 66

Maintenance
5‐4
E
2013 Nordson Corporation
All rights reserved
MicroMax
Issued 12/13
P/N 768635_11
CAUTION: Before removing blow down valves ensure that the
air supply and electrical supply have been turned off and locked
out.
1. Turn off the air supply.
2. Operate the cartridge pulsing for one minute or until the air manifold is
completely empty.
3. Check on the pulsing air that all the air has been exhausted from the
blow down plenum.
4. Turn off the electrical supply.
5. Remove the access panel at the rear of the booth.
6. Remove the suspect valve and inspect and replace if necessary.
7. Turn on supplies and test.
8. Replace the access panel at the rear of the booth.
WARNING: Ensure Personal Protective Equipment is worn
while carrying out this procedure.
1. Turn off the booth and isolate.
2. Ensure all protective clothing is worn, firmly grasp the top of the
cartridge and twist clockwise.
WARNING: A powder laden cartridge filter can be heavy. It
may be necessary for two persons to be available to remove the
cartridge filter.
3. Remove by twisting the body anti-clockwise to release and dispose of
the old cartridges in accordance to local regualations.
4. Replace the cartridge in the reverse order.
4. Blow Down Valve
Assembly Replacement
5. Cartridge Replacement