Nordson MicroMax 1, Руководство пользователя

Страница: 14 / 66

Safety
1‐2
E
2013 Nordson Corporation
All rights reserved
Issued 10/98
S1EN-03-[SF-Powder]-6
To prevent injury follow these instructions.
S
Do not operate or service equipment unless you are qualified.
S
Do not operate equipment unless safety guards, doors, or covers are
intact and automatic interlocks are operating properly. Do not bypass
or disarm any safety devices.
S
Keep clear of moving equipment. Before adjusting or servicing any
moving equipment, shut off the power supply and wait until the
equipment comes to a complete stop. Lock out power and secure the
equipment to prevent unexpected movement.
S
Relieve (bleed off) hydraulic and pneumatic pressure before adjusting
or servicing pressurized systems or components. Disconnect, lock
out, and tag switches before servicing electrical equipment.
S
While operating manual electrostatic spray guns, make sure you are
grounded. Wear electrically conductive gloves or a grounding strap
connected to the gun handle or other true earth ground. Do not wear
or carry metallic objects such as jewelry or tools.
S
If you receive even a slight electrical shock, shut down all electrical or
electrostatic equipment immediately. Do not restart the equipment
until the problem has been identified and corrected.
S
Obtain and read Material Safety Data Sheets (MSDS) for all materials
used. Follow the manufacturer's instructions for safe handling and use
of materials, and use recommended personal protection devices.
S
To prevent injury, be aware of less‐obvious dangers in the workplace
that often cannot be completely eliminated, such as hot surfaces,
sharp edges, energized electrical circuits, and moving parts that
cannot be enclosed or otherwise guarded for practical reasons.
5. Personal Safety