Nordmende UHD 43A, Руководство пользователя

Страница: 39 / 112

Page 39
Setting up the Internet connection
If you have authorised the Internet connection and have accepted the privacy policy in the
previous section, you can now set up the Internet connection.
You can skip this section if your device is already connected to the Internet via a router with a LAN
cable.
>
Select [Select Wi-Fi] to establish a wireless connection with a Wi-Fi router.
>
You can select your preferred Wi-Fi network in the list below. If the Wi-Fi network is
password protected, you will be prompted to enter the password using the on-screen
keyboard. Then select [OK] . If you have entered the password correctly, you can proceed
to the next section.
Selecting a signal source
>
Use the
◄/►
and
▼/▲
buttons to select your preferred signal source.
DTV - Digital terrestrial television DVB-T2 or digital cable television DVB-C
DVB-S - Digital satellite television DVB-S
AV - Analogue audio/video input of external devices
HDMI - Digital input of external devices.
If you have selected [DTV] as the signal source, you must perform a channel search upon
completion of the initial setup. Further details can be found in the chapter “9 Channel
search” on page 42.
If you have selected [DVB-S] , the device will start with a preprogrammed channel list.
Loading programme information
If the Internet connection has been authorised and set up, the programme information will be
loaded as the last step. This may take a moment.
Setup completed
>
Press the OK button to complete the initial setup.
6 Programme guide
In the programme guide, the current and the next programme are displayed clearly in a timeline
view for the currently selected channel and the following channels in the channel list. The vertical
green line represents the current time. You can use the
◄/►
and
▼/▲
arrow buttons to select
a programme. You can press the OK button to display more information about the programme or
assign the programme to a recording timer.
If you have set up an Internet connection, the EPG data will be updated overnight. To configure
the EPG function, press the
MENU
button and select
Settings > EPG
.