Nordmann Engineering Omega 12, Руководство по эксплуатации

Страница: 50 / 104

50
Device Service View and reset the service values of the Nordmann Omega.
– Service Done: Resetting the maintenance counter after maintenance has been carried out.
– Heat Count: Shows the operating hours extrapolated to 100% steam output
– Next Service: Remaining time in hours until the next maintenance is due.
Filter Cartridge Display, set and reset of the filter cartridge service values.
– Cartridge Size: Determining the size of the filter cartridge used.
– Small
– Large
– Cartridge Replaced: Resetting the maintenance counter after replacing the filter cartridge.
– Water Count: Shows the water consumption in liters.
– Replace in: Remaining water consumption in liters until the next replacement of the filter
cartridge is due.
Hardware Hardware information of the heating channels.
–
Hardware
:
– Sw. Cycles 1: Number of switching cycles of heating channel No. 1
– Sw. Cycles 2: Number of switching cycles of heating channel No. 2
– Sw. Cycles 3: Number of switching cycles of heating channel No. 3
– Sw. Cycles 4: Number of switching cycles of heating channel No. 4
– Sw. Cycles 5: Number of switching cycles of heating channel No. 5
– Replace HW 1: Theoretical remaining switching cycles of heating channel No. 1
– Replace HW 2: Theoretical remaining switching cycles of heating channel No. 2
– Replace HW 3: Theoretical remaining switching cycles of heating channel No. 3
– Replace HW 4: Theoretical remaining switching cycles of heating channel No. 4
– Replace HW 5: Theoretical remaining switching cycles of heating channel No. 5
– Op. Hours HW 1: Current operating hours of the heating channel No. 1
– Op. Hours HW 2: Current operating hours of the heating channel No. 2
– Op. Hours HW 3: Current operating hours of the heating channel No. 3
– Op. Hours HW 4: Current operating hours of the heating channel No. 4
– Op. Hours HW 5: Current operating hours of the heating channel No. 5
Draining Draining the steam tank drain.
Device test – Level Test: Performing a functional test of the level unit.
Restart Restart device software