background image

 

11. NOrd WAVE MANAGEr 

49

Position

The Sample Instruments in the list are numbered; these 

numbers correspond to what you select with the rotary 

encoder in the Osc 2 section in the Nord Wave. 

Name

The Sample Instrument gets its name from the name of the 

Project that gave birth to it. If a Project has not been saved 

– being nameless that is - and you generate a Sample 

Instrument, it will get the default name: Untitled. The 

name of the Sample Instrument will be shown in the Nord 

Wave display, when it is selected. If a Sample Instrument is 

uploaded to the computer hard drive, the resulting .nwi file 

name will be same as the SI name. Change the file name, 

and the SI name is also changed when that file is down-

loaded to the Nord Wave. 

Note: Two Sample Instruments in the Nord Wave 

  

F

cannot have the same name, so if you happen to gen-

erate two Sample Instruments without having saved 

the Projects, then the second Sample Instrument 

called Untitled will overwrite the first one that had 

that same name. If you try to drag an .nwi file from 

the hard drive to the list and it has the same name as 

a SI in the list, that operation will not be allowed and 

you’ll get a notice about this in the message area on 

the footer in the Manager window.

File Types and Names

Files associated with the Nord Wave and the Nord Wave 

Manager use the following extensions:

.nwiproj – Nord Wave Project file

This is a file containing the Project settings. Audio files are 

not included in this file - any changes to the original audio 

files will affect you project. This file type will be created 

when you save a Project.
These files will be needed if you want to change any set-

tings in a particular Sample Instrument at a later stage, so 

save often and keep copies in a safe location. 

.nwi - Nord Wave Instrument file 

This is a file containing the cropped and encoded audio 

and the Project settings for one Sample Instrument. 
This file type will be created and saved to the hard drive 

when you generate a Sample Instrument from the Instru-

ment menu (or with the Generate button in the Manger 

window). 
You can also create .nwi files when you upload Sample 

Instruments from the Nord Wave, in the Nord Wave tab in 

the Manager. 
Use this file type to share Sampled Instruments with other 

Nord Wave users. The .nwi file can not be opened or edited; 

it can only be down- or uploaded to and from a Nord Wave. 
To edit any content or setting in a Sample Instrument 

you must go back to the original Nord Wave Project file 

(.nwiproj), do the edits there and then re-generate the 

Sample Instrument. An .nwi file may or may not contain the 

Program settings that you wish to include with the SI. 
In order for these settings to be included, you need to get 

the settings from the Wave from within the Manager ap-

plication. read more on this at page 47.
A Sample Instrument gets its name from the Project name. 

If you look at the Nord Wave LCd when you scroll through 

the SI:s with the OSC2 LEd-dial, you will see that name, but 

also other groups of characters in the second row. 
This is a naming convention that you can use if you rename 

the file name on the computer hard drive and then down-

load the SI.s again to the Nord Wave. The file name can 

include three character groups and these will be entered in 

the following order: name_description_revision.nwi
The groups are separated by the underscore character. 

The name will appear in the first LCd row (maximum of 16 

characters), the description and revision in the second row 

(also a maximum of 16 characters in total).   

.nwp - Nord Wave Program file

 This is a file containing the Program settings from one 

program in the Nord Wave. It does not contain any Sample 

Instruments. 
When you share a custom Program using a custom Sample 

Instrument, you need to share both the .nwp and an .nwi 

file. If you upload a Program file to the computer hard 

drive, you may rename the computer file. 
This will then give the Program a new name if it is down-

loaded to the Wave, as it appears in the LCd (and the Nord 

Wave tab in the Manager).

Size

Indicates the size of the Sample Instrument. This may be 

useful if you are short on memory and wants to know if 

a particular SI occupies a certain amount of space in the 

Flash memory.

Ver

To be documented.

Date

Indicates the date and time when the Sample Instrument 

was saved after its latest edit.

Footer 

The Nord Wave tab has some file management functions in 

the footer area.

Delete file

If a Sample Instrument is selected in the list and you click 

on delete, it will be erased from the Flash memory without 

any confirmation request. The space that the deleted SI 

occupied is not immediately available to other SI:s, even 

though it is gone from the list and its location is free. The 

Flash memory needs to be cleaned to get rid of any de-

leted samples in order to free up the space. 

Clean Deleted Space

This function will clean up the space where any deleted 

SI:s where. If nothing has been deleted, this button will be 

blanked out. deleted space that hasn’t been cleaned yet 

will be indicated with yellow color in the Memory Indicator. 

Format

This is a radical function; it will format the entire Flash 

memory and prepare it for some brand new content. You 

will be asked to confirm your intentions. 

Memory Indicator

This will give you a numerical and a visual indication of 

how the Flash memory space is being used. red indicates 

the spaced used by the samples, yellow is space from 

deleted samples, but not yet available since it hasn’t been 

cleaned and green is the space that free to use for new 

Sample Instruments.

Program lists

When Programs is selected in the Nord Wave tab drop-

down, the window will be divided in two identical lists. 

There are two lists, simply to make it easy to move pro-

grams from one location to another. 

Содержание 50303






















































Отзывы: