NORDAC FLEX (SK 200E ... SK 235E) – Brief instructions for Frequency Inverters
86
BU 0240 en-US-4920
Pos: 687 /Anleitungen/El ektr onik/FU und Starter/6. M eldung en zum Betriebszustand/War nmel dungen (T abellenüberschrift) @ 3\mod_1361803463080_14638.docx @ 59918 @ 5 @ 1
Warning messages
Display in the
Simple Box/Control Box Warning
Text in the Parameter Box
Cause
• Remedy
Group
Details in
P700 [-02]
Pos: 688 /Anleitungen/El ektr onik/FU und Starter/6. M eldung en zum Betriebszustand/Störm eldung en (Auflistung)/W arnung C 001 [SK 180E ... SK 5xxE/SK 300P/SK 500P] @ 2\mod_1347456220101_14638.docx @ 46976 @ @ 1
C001
1.0
Inverter overtemp.
"Inverter overtemperature"
(inverter heat sink)
Temperature monitoring of the inverter
Warning, permissible temperature limit reached.
• Reduce ambient temperature
• Check device fan/cabinet ventilation
• Check the device for dirt
Pos: 689 /Anleitungen/El ektr onik/FU und Starter/6. M eldung en zum Betriebszustand/Störm eldung en (Auflistung)/W arnung C 002 [SK 180E/SK 2xxE/SK 5xxE/SK2xxE-FD S/SK 500P] @ 2\m od_1347456223954_14638.docx @ 47001 @ @ 1
C002
2.0
Motor overtemp. PTC
“Motor overtemp. PTC"
Warning from motor temperature sensor (triggering
threshold reached)
• Reduce motor load
• Increase motor speed
• Use external motor fan
2.1
Motor overtemp. I²t
“Motor overtemperature I²t“
Only if I
2
t motor (P535) is
programmed.
Warning: I2t motor monitoring (1.3 times the rated current
reached for the time period specified in (P535))
• Reduce motor load
• Increase motor speed
2.2
Ext Resistor Temp
"Overtemperature of external
braking resistor"
Overtemperature via digital
input (P420 […])={13}
Warning: Temperature monitor (e.g. braking resistor) has
activated
• Digital input is low
Pos: 690 /Anleitungen/El ektr onik/FU und Starter/6. M eldung en zum Betriebszustand/Störm eldung en (Auflistung)/W arnung C 003 [SK 180E ... SK 5xxE] @ 2\m od_1347457006237_14638.docx @ 47200 @ @ 1
C003
3.0
I
2
t overcurrent limit
Warning: a.c. inverter: I
2
t limit has triggered, e.g. > 1.3 x I
n
for 60 s (also note P504)
• Continuous overload at inverter output
3.1
Chopper overtemperature I
2
t
Warning: I
2
t limit for the brake chopper has activated, 1.3
times values reached for 60 s (please also pay attention to
P554, if present, and P555, P556, P557)
• Avoid overcurrent in brake resistance
3.5
Torque current limit
Warning: Torque current limit reached
• Check (P112)
3.6
Current limit
Warning: Current limit reached
• Check (P536)
Pos: 691 /Allgem ein/Allgem eingültig e Module/---------Seitenumbr uch kompakt --------- @ 13\m od_1476369695906_0.docx @ 2265496 @ @ 1
Содержание NORDAC FLEX SK 205E Series
