Norcool CU-350 ECO, Руководство по эксплуатации и установке

Страница: 17 / 24

17
Figure 5
6. Using the Appliance
6.6 Cleaning and maintenance
It is important to clean the condenser dust filter at least four times a year, and the
condenser at least once a year, to ensure performance. The consumer is respon-
sible for keeping the filter and the condenser clean. This is essential to ensure that
the guarantee will apply in the event of unit malfunction.
Filter Cleaning
• Unplug the unit from the mains.
• Remove the filter by pulling it out from the slot located in the plastic cover of
the warm side.
• Vacuum or wash it thoroughly with warm water to completely remove accu-
mulated dust.
• Dry and reinstall the filter by inserting it to the front cover slot.
Condenser Cleaning
• Unplug the unit from the mains.
• Remove the condenser filter as instructed above.
• Unscrew the 4 screws on the front cover and remove it (fig 5).
• Vacuum clean or gently brush the visible condenser fins under the large steel
bracket. Be careful not to damage the thin fins. This will reduce the unit’s cool-
ing function.
• Fix the front cover with the 4 screws and insert the condenser filter.
In very dusty conditions, clean the condenser at least twice a year and check that
the unit is properly clean. This can be done by projecting a light from the under-
side up through the condenser fins using a flashlight. When looking directly down
on the fans, it should be possible
to see the light through the fins. If
the light cannot penetrate, there is
still too much dust in the unit.
To avoid mould forming, bad
smells etc. regular cleaning of the
unit is essential. We recommend
mild, warm soapy water for clean-
ing the unit and the water collector
located inside the cold room.