Norac UC4+ NITRO Miller 3200 Series, Руководство по установке, Страница: 17 / 35

14
4.5 R
OLL
S
ENSOR
I
NSTALLATION
Mount the roll sensors to the included
roll sensor brackets using the machine
screws and nylon lock nuts, as
illustrated in
Figure 9 .
The roll sensors must be
mounted tightly to the
brackets.
Figure 9 – Mounting the Roll Sensor
to the Roll Sensor Mounting Bracket
When mounting the roll sensors use the
following guidelines and refer to
Figure
10.
a) Ensure the roll sensors are sitting
relatively level when the sprayer
chassis and boom are level.
b) Both roll sensors must be mounted
with the circular AMP connector
facing towards the Right-Hand Wing
(when looking from the rear of the
sprayer).
Figure 10 – Mounting Guidelines