Norac FLEXI-COIL 67 Series, Руководство по установке

Страница: 20 / 33

17
4.5.3 Inverted Roll Sensor Mounting
If desired, the Roll sensor may be mounted
inverted, so long as the connector exits
towards the right-hand boom. Inverted mounting may be used to optimize the
mounting criteria as explained at the
beginning of
Section 4.5
Figure 19 – Inverted Roll Sensor Mounting may be Applicable for Optimal Performance
4.5.4 Temperature probe
Fasten the temperature probe (
E03
) to the
UC4 valve block using the included
3/8x1/2” bolt as illustrated in
Figure 20 .
Figure 20 – UC4+ Valve block with
Temperature Probe Installed