Nonin 7500FO Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 42

Nonin 7500FO Скачать руководство пользователя страница 34

28

Service, Support, and Warranty

Service, Support, and Warranty

A return authorization number is required before returning any product to Nonin. To obtain this return
authorization number, contact Nonin Technical Service:

nonin.com

Warranty

NONIN MEDICAL, INCORPORATED, (Nonin) warrants to the purchaser, for a period of one year from the
date of purchase, each Model 7500FO battery pack. Nonin warrants the pulse oximetry module of the Model
7500FO for a period of three years from the date of purchase. Extended warranties are available on most
Nonin pulse oximeter models. Please consult your local Nonin distributor for additional information.

Nonin shall repair or replace any Model 7500FO found to be defective in accordance with this warranty, free
of charge, for which Nonin has been notified by the purchaser by serial number that there is a defect,
provided said notification occurs within the applicable warranty period. This warranty shall be the sole and
exclusive remedy by the purchaser hereunder for any Model 7500FO delivered to the purchaser which is
found to be defective in any manner, whether such remedies be in contract, tort, or by law.

This warranty excludes cost of delivery to and from Nonin. All repaired units shall be received by the
purchaser at Nonin's place of business. Nonin reserves the right to charge a fee for a warranty repair request
on any Model 7500FO that is found to be within specifications.

The Model 7500FO is a precision electronic instrument and must be repaired by Nonin Technical Service.
Accordingly, any sign or evidence of opening the Model 7500FO, field service by non-authorized personnel,
tampering, or any kind of misuse or abuse of the Model 7500FO, shall void the warranty in its entirety. All
non-warranty work shall be done according to Nonin standard rates and charges in effect at the time of
delivery to Nonin.

DISCLAIMER/EXCLUSIVITY OF WARRANTY:

THE EXPRESS WARRANTIES SET FORTH IN THIS MANUAL ARE EXCLUSIVE AND NO OTHER
WARRANTIES OF ANY KIND, WHETHER STATUTORY, WRITTEN, ORAL, OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, SHALL APPLY.

CAUTION:

This device is a precision electronic instrument and must be repaired by Nonin

Technical Service. Field repair of the device is not possible. Do not attempt to open the case
or repair the electronics. Opening the case may damage the device and void the warranty.

Nonin Medical, Inc.

13700 1st Avenue North

Plymouth, Minnesota 55441, USA

(800) 356-8874 (USA and Canada)

+1 (763) 553-9968 (outside USA & Canada)

Fax: +1 (763) 553-7807

E-mail: [email protected]

Nonin Medical B.V.

Prins Hendriklaan 26

1075 BD Amsterdam, Netherlands

+31 (0)13 - 79 99 040 (Europe)

Fax: +31 (0)13 - 79 99 042

E-mail: [email protected]

!

«
...
32
33
34
35
36
...
»

Содержание 7500FO











































Отзывы:

Нет отзывов