Nokta FORS Gold Скачать руководство пользователя

Страница: 31 / 33

The technical settings of the device (Mode, Ground Balance, Sensitivity, iSAT, Threshold,

and ID Masking, Frequency) come with their factory default values at each startup.

Personal settings (Volume, Tone, Vibration, Brightness, and Language) come with the last

adjusted value when the device is turned off and on again.

You can customize and save your startup settings by following the steps below:

1. Go to the menu screen and be sure that all the options are at the desired setting.

2. Wait or press the pinpoint button to exit the menu.

3. On the main screen, press and hold one of the up or down switches for at least 4 seconds.

The menu screen will appear; do not let go of the switch!

4. Keeping the switch pressed, press the '-' (minus) button. ''Please wait'' message will

appear on screen. You can let go of the switches.

5. Wait while the message is on screen. In about 4-6 seconds, the process will finish and the

menu screen will come up. It is normal for the device to emit different sounds during this

process.

6. Turn off and on the device again. Go to the menu to check whether your desired startup

settings are saved or not.

Changing the startup settings do not mean changing the factory default settings. You can

restore factory defaults at any time. This process is done the same way. The only difference

is that you use the '+' switch instead of '-'

1. Be sure that you have exited the menu and you are in the main screen.

2. On the main screen, press and hold one of the up or down switches for at least 4 seconds.

The menu screen will appear; do not let go of the switch!

3. Keeping the switch pressed, press the '+' (plus) switch. ''Please wait'' message will appear

on screen. You can let go of the switches.

4. Wait while the message is on screen. In about 4-6 seconds, the process will finish and the

menu screen will come up. It is normal for the device to emit different sounds during this

process.

5. Turn off and on the device again. Go to the menu and be sure that the factory defaults

are restored.

FACTORY and STARTUP SETTINGS

Page 30

Содержание FORS Gold


































Результаты поиска

Содержание FORS Gold

Отзывы:

Похожие инструкции для FORS Gold

Бренды по названию

Популярные бренды

Nokta FORS Gold, Руководство пользователя

Результаты поиска

Содержание FORS Gold

Отзывы:

Похожие инструкции для FORS Gold

Бренды по названию

Популярные бренды