Nokia Network Voyager, Справочное руководство, Страница: 477 / 700

Voyager Reference Guide 479
because the system determines the interfaces associated with those virtual
addresses instead of the user having to associate interfaces with the virtual
addresses.
Note
You cannot convert existing monitored-circuit virtual routers into this type
of configuration. In order to use this method, you must delete existing
monitored-circuit configurations. See Deleting Existing Monitored Circuit
Configurations (Simplified Configuration)
Note
Once you use the simplified method of creating a monitored circuit, you
cannot alter the monitored-circuit configuration by using the Legacy
Configuration method. If you wish to use the Lagacy Configuration
method, you must delete the existing monitored-circuit configurations,
and then create new monitored-circuit virtual routers with the Legacy
Configuration. For more information, see Creating a Virtual Router in
Monitored Circuit Mode (Legacy Configuration).
1.
Click
C
ONFIG
on the home page.
2. Click the VRRP link in the Router Services section.
3.
Enter the virtual router identification (VRID) in the
C
REATE A NEW
M
ONITORED
-C
IRCUIT
V
IRTUAL
R
OUTER
text box, and then click A
PPLY
.
Fields appear that allow you to enter the IP address(es) and other
attributes associated with the virtual router.
Note
The Backup Address(es) associated with the monitored circuit virtual
router must not match the real IP address of any host or router on the
interface’s network.
Repeat this step if you want to add additional Backup Addresses.