manualshive.com logo in svg

Nokia Network Voyager, Справочное руководство, Страница: 114 / 700

Поделиться
Скачать
Nokia Network Voyager Скачать руководство пользователя страница 114

5

 Configuring Interfaces

114

Voyager Reference Guide

Example

—

isdn-s2p1

4.

From the pull-down menu in the 

L

OGGING

 field, select the level of 

messages to be logged by ISDN.

All messages of this level and below will be sent to the message log.

Viewing the Message Log

1.

Click 

M

ONITOR

 on the home page.

2.

Click the 

View Message Log

 link under the System logs heading.

The most-recent system log messages display.

Tracing

The tcpdump utility can be used to trace ISDN D-channel traffic (Q.921 and 
Q.931 protocols) and B-channel traffic (PPP/multilink PPP and TCP/IP 
protocols).

When running tcpdump on an ISDN interface, if no options are given on the 
command line, the following messages are decoded and displayed:

!

Q.931 messages

!

PPP messages and the fields inside them

!

any IP traffic on the B-channels.

If -e option is specified on the command line, in addition to the above 
messages, all Q.921 messages will also be decoded and displayed.

If the -v option is used, Q.931 messages will be displayed. Also the fields in 
all PPP messages and their values will be displayed in an extended format.

Tracing ISDN Traffic Using tcpdump

1.

Create a telnet session and log into the firewall.

2.

Type 

tcpdump -i <isdn-interface>

Содержание Network Voyager





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов