Nokia Network Voyager, Справочное руководство

Страница: 418 / 700

7
Configuring Traffic Management
420 Voyager Reference Guide
Deleting an ATM QoS Descriptor
1.
Click
C
ONFIG
on the home page.
2.
Click the ATM QoS Descriptor Configuration link in the
T
RAFFIC
M
ANAGEMENT
section.
3.
In the
E
XISTING
ATM Q
O
S D
ESCRIPTORS
field, click the
D
ELETE
check
box next to the name of the ATM QoS Descriptor that you want to delete.
Note
You can delete an existing ATM QoS Descriptor only after you dissociate
it from an existing permanent virtual channel (PVC). See the steps below.
4.
Click A
PPLY
.
5.
The ATM QoS Descriptor disappears from the
E
XISTING
Q
O
S
D
ESCRIPTORS
field.
6.
Click
S
AVE
to make your changes permanent.
If the ATM QoS Descriptor that you want to delete is associated with an
existing PVC complete the steps below.
1. Click C
ONFIG
on the home page.
2.
Click Interfaces link.
3.
Click the appropriate ATM interface link in the
P
HYSICAL
field.
4.
You are now in the physical interface page for the interface you selected.
Click the
ATM QoS Configuration link. You are now in the ATM QoS
Configuration page for the physical interface you selected. In the
Q
O
S
C
ONFIGURED
PVC
S
field, click the Q
O
S D
ESCRIPTOR
drop-down
window and select D
EFAULT
(UBR).
5. Click A
PPLY
, and then click S
AVE
to make your changes permanent.
6.
Click the ATM QoS Descriptors link.