manualshive.com logo in svg

Nokia NetMonitor, Руководство пользователя

Поделиться
Скачать
Nokia NetMonitor Скачать руководство пользователя страница 8

 

8

Display 13 – Uplink DTX switching display 

 
        **************         ############## 
        *aaaaaaaaaa  *         #DTXMode     # 
        *DTX(DEF):bbb*         #DefaulDTXSta# 
        *DTX(BS) :ccc*         #DTXValFromBS# 
        *            *         #            # 
        **************         ############## 
 
 
With this display it is possible to change wether MS to use DTX or not. 
 
This display must be activated from MENU to change DTX state. When MENU is not active and 
the user is scrolling field test displays with NEXT and PREVIOUS, the DTX state will not be 
changed. 
 
        aaaaaaaaaa  status of switched mode. 
                       DTX:ON    : MS uses DTX 
                       DTX:OFF   : MS does not use DTX 
                       DTX:DEF   : MS use default state of DTX 
                       NOTALLOWED: BS does not allow MS to decide if it uses 
                                   DTX or not. 
        bbb         default state of DTX in MS. The value is either ON or OFF 
        ccc         is DTX value from BS 
                       MAY : BS allows MS to decide if it uses uplink DTX or not 

 

                       USE : BS controls MS to use DTX (on uplink) 
                       NOT : BS controls MS not to use DTX (on uplink) 
         
         

Display 14 – Toggle Screening Indicator 

 
        **************                   ############## 
        *  SCREENING *                   #Use menu to # 
        *  INDICATOR *                   #  change    # 
        *    IS XX   *  XX : 00 or 01    # Screening  # 
        *            *                   # indicator  # 
        **************                   ############## 
 
    When selected, changes the value of the Screening Indicator from 0 to 1 and 
    vice versa. 
 
 

Содержание NetMonitor






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды