manualshive.com logo in svg

Nokia NetMonitor, Руководство пользователя

Поделиться
Скачать
Nokia NetMonitor Скачать руководство пользователя страница 19

 

19

Display 60 – Reset counters to zero 

 
        **************        ############## 
        * FIELD TEST *        #Use menu to # 
        *  DISPLAY   *        #reset field # 
        *  COUNTERS  *        #test display# 
        *   RESET    *        # counters   # 
        **************        ############## 
 
 
With this display all counters of the field test display can be reset (i.e. all counters in 
40 and 60 series). 
 
 
 

Display 61 – Search and reselection counter display 

 
        ++++++++++++++        ############## 
        +NOPSW  :aaaa+        #PSWMesgCntr # 
        +SYNCR  :bbbb+        #SyncMeasCntr# 
        +RESELEC:cccc+        #CellReselCtr# 
        +            +        #            # 
        ++++++++++++++        ############## 
 

 
aaaa 

counter for MDI_NO_PSW_FOUND message received from DSP in hexadecimal form. 

bbbb 

counter for synchronization measurement attempts in decimal form. If counter 
value is over 9999 then four x are shown. 

cccc 

counter for cell reselections in hexadecimal form. 

 
 
On poweroff the values of the counter displays are stored onto the EEPROM, where they will 
be read during power on. To initialize the counters to zero, select display 60. These 
counters are automatically reset to zero when they exceed their maximum value. 
 
 

Display 61 (dualband) – Search and reselection counter display 

 
        ++++++++++++++        ############## 
        +aaaaa  bbbbb+        #NOPswGSM DCS# 
        +ccccc  ddddd+        #Sync GSM DCS# 
        +eeeee  fffff+        #reselG>G D>D# 
        +ggggg  hhhhh+        #reselG>D D>G# 
        ++++++++++++++        ############## 
 

aaaaa 

GSM900 counter for MDI_NO_PSW_FOUND message received from DSP in decimal form 
(max 99999). 

bbbbb 

GSM1800 counter for MDI_NO_PSW_FOUND message received from DSP in decimal form 
(max 99999). 

ccccc 

GSM900 counter for synchronization measurement attempts in decimal form. If 
counter value is over 99999 then five x are shown. 

ddddd 

GSM1800 counter for synchronization measurement attempts in decimal form. If 
counter value is over 99999 then five x are shown. 

eeeee 

counter for GSM900  -> GSM900  cell reselections in decimal form (max 99999). 

fffff 

counter for GSM1800 -> GSM1800 cell reselections in decimal form (max 99999). 

ggggg 

counter for GSM900  -> GSM1800 cell reselections in decimal form (max 99999). 

hhhhh 

counter for GSM1800 -> GSM900  cell reselections in decimal form (max 99999). 

 
On power off the values of the counter displays are stored onto the EEPROM, where they will 
be read during power on. To initialize the counters to zero, select display 60. Counters are 
automatically reset to zero when they exceed their maximum value. 
 

 

Содержание NetMonitor






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды