manualshive.com logo in svg

Nokia NetMonitor, Руководство пользователя

Поделиться
Скачать
Nokia NetMonitor Скачать руководство пользователя страница 16

 

16

Display 42 (only in dualband phones) – Handover display, INTRA CELL 

 

        ++++++++++++++         ############## 
        + aaaa  bbbb +         #G>G IntraD>D# 
        + cccc  dddd +         #G>D  OK  D>G# 
        +eeeff         #IntraHoFail # 
        +iiijj         # BackToPrev # 
        ++++++++++++++         ############## 
 

aaa 

counter of successful INTRACELL handovers (max 9999) from GSM900  to GSM900 

bbb 

counter of successful INTRACELL handovers (max 9999) from GSM1800 to GSM1800 

ccc 

counter of successful INTRACELL handovers (max 9999) from GSM900  to GSM1800 

ddd 

counter of successful INTRACELL handovers (max 9999) from GSM1800 to GSM900 

 
eee 

counter of failed INTRACELL handovers (max 999) from GSM900  to GSM900 

fff 

counter of failed INTRACELL handovers (max 999) from GSM1800 to GSM1800 

ggg 

counter of failed INTRACELL handovers (max 999) from GSM900  to GSM1800 

hhh 

counter of failed INTRACELL handovers (max 999) from GSM1800 to GSM900 

 
iii 

counter of successful back to previous normal INTRA CELL channel attempts  
(max 999) from GSM900  to GSM900 

jjj 

counter of successful back to previous normal INTRA CELL channel attempts  
(max 999) from GSM1800 to GSM1800 

kkk 

counter of successful back to previous normal INTRA CELL channel attempts  
(max 999) from GSM900  to GSM1800 

lll 

counter of successful back to previous normal INTRA CELL channel attempts  
(max 999) from GSM1800 to GSM900 

 
Counters will stop when they reach their maximum. To initialize the counters to zero, select 
display 40. Also display 60 initializes these counters. 

 
 

Display 43 L2 display 

 
       

++++++++++++++         ############## 

        +T200MS :aaaa+         #T200 MS GSM # 
        +T200BS :bbbb+         #T200 BS GSM # 
        +T200MS :cccc+         #T200 MS DCS # 
        +T200BS :dddd+         #T200 BS DCS # 
        ++++++++++++++         ############## 
 
 

aaaa 

GSM900 : counts how many times T200 in MS has expired and therefore a L2 
transmission has been repeated. 

bbbb 

GSM900 : counts how many times T200 in BS (network) has expired and therefore a 
L2 frame was requested again. 

cccc 

GSM1800: counts how many times T200 in MS has expired and therefore a L2 
transmission has been repeated. (for dualband phones) 

dddd 

GSM1800: counts how many times T200 in BS (network) has expired and therefore a 
L2 frame was requested again. (for dualband phones) 

 
The GSM900 counters are also valid in GSM900/GSM1800 multiband phones. Counters will stop 
when they reach their maximum. To initialize the counters to zero, select display 40. 
Display 60 also initializes these counters. 
 
 

Display 44 – Toggle revision level 

 

        **************                   ************** 
        *            *                   *            * 
        * REVISION   *                   * REVISION   * 
        *LEVEL IS 00 *                   *LEVEL IS 01 * 
        *            *                   *            * 
        **************                   ************** 
 
When selected, changes the value of Revision Level from 0 to 1 and  
vice versa. I have no idea if this makes sense in any circumstances. 
 

Содержание NetMonitor






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды