manualshive.com logo in svg

Nokia NetMonitor, Руководство пользователя

Поделиться
Скачать
Nokia NetMonitor Скачать руководство пользователя страница 23

 

23

Display 74 - DSP audio enhancements 1 (DRC) 

 
        ++++++++++++++    Example:   ++++++++++++++        ############## 
        +  aaa  bbb  +               +  101  408  +        #DSigL USigL # 
        +       ccc  +               +       480  +        #      NseLvl# 
        +  dd    ee  +               +  01    03  +        # DTbl  UTbl # 
        +            +               +            +        #            # 
        ++++++++++++++               ++++++++++++++        ############## 
 

aaa 

Downlink signal level in dB, calculated using DRC level measuring block. 
Decimal point and sign is not shown, ie. -10.5 is show 105. 

bbb 

Uplink signal level in dB, calculated using DRC level  measuring block. Decimal 
point and sign is not shown, ie. -10.5 is show 105. 

ccc 

Background noise signal level in dB, calculated using  DRC level measuring 
block, decimal point and sign is  not shown, ie. -10.5 is show 105. 

dd 

Downlink DRC table value, shown in decimal integer, two digits. 

ee 

Uplink DRC table value, decimal integer, two digits. 

 
The display is reset and restarted when call is taken (if FT display counters are enabled). 
When call is terminated the display is frozen to show last values. Display values will not 
be saved to the EEPROM. 
 
 

Display 75 - Audio path status 

 
        ++++++++++++++        ############## 
        +Mod:a        #ExtAudStatus# 
        +AudReq: bbbb+        #AudioRequest# 
        +AccMod: cccc+        #AccessoryMod# 
        +H2Path: dd  +        #HFU2Path    # 
        ++++++++++++++        ############## 
 

aaaaa 

external audio status, values are: HP, HF, HEADSET, EXT and HP_OFFHO 

bbbb 

audio_request bitmap in hex, contents (masks) are specified in AUD_DATA.H 

cccc 

Accessory audio mode 

dd 

HFU-2 path 

 
 

Display 76 - Ear (= downlink) audio display 

 
        ++++++++++++++    Example:   ++++++++++++++        ############## 
        + Vaa  Pbbb  +               + V0A  P125  +        #EVol PeakVal# 
        + Cccc CAddd +               + C000 CA001 +        #CutOff COAve# 
        +PAeee       +               +PA353       +        #PkAver      # 
        +            +               +            +        #            # 
        ++++++++++++++               ++++++++++++++        ############## 
 

aa 

Volume level. 

bbb 

Peak value of downlink audio signal during last frame in dB, decimal point and 
sign is not shown, ie. -10.5 is show 105. 

ccc 

Cut off counter value of last frame. This counter counts how many samples are 
saturated during last frame. 

ddd 

Moving average of cut off counter, decimal point and sign is not shown, ie. -
10.5 is show 105. 

eee 

Moving average of peak levels. 

 
The display is reset and restarted when call is taken (if FT display counters are enabled). 
When call is terminated the display is frozen to show last values. Display values will not 
be saved to the EEPROM. 
 
 

Содержание NetMonitor






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды