manualshive.com logo in svg

Nokia NetMonitor, Руководство пользователя

Поделиться
Скачать
Nokia NetMonitor Скачать руководство пользователя страница 18

 

18

Display 55 – Block display 2 

 
        ++++++++++++++         ############## 
        +aa bb  aa bb+         #ResF9 ResF10# 
        +aa bb  aa bb+         #ResF11ResF12# 
        +aa bb  aa bb+         #ResF13ResF14# 
        +aa bb  aa bb+         #ResF15ResF16# 
        ++++++++++++++         ############## 
 

1. row: Block set 9, block set 10 
2. row: Block set 11, block set 12 
3. row: Block set 13, block set 14 
4. row: Block set 15, block set 16 
 
aa 

Number of reserved blocks 

bb 

Number of free blocks in worst case 

 
 

Display 56 – Block display 3 

 
        ++++++++++++++        ############## 
        + aaaaaa bbb +        # Ptr   Cntr # 
        + cccccccc   +        # Task       # 
        +            +        #            # 
        +            +        #            # 
        ++++++++++++++        ############## 
 

aaaaaa 

Pointer to memory where double deallocation was called, in hex format. 

bbb 

Counter for failed deallocations. 

cccccccc 

Name of task which last tried to double deallocate a block. 

 
Note: This display is only valid when the counter for failed deallocations is not zero.

 

 
 

Display 57 – Memory status before reset 

 
        ++++++++++++++         ############## 
        +aaaaa         # Status of  # 
        +aaaaa...    +         # stacks     # 
        +bbbbbbbb    +         # Block sets # 
        +            +         #            # 
        ++++++++++++++         ############## 
 

aaaaaa 

Status of each stack before reset. First position contains the status of stack 
0, second position the status of stack 1 and so on. The last position contains 
the status of System stack. Number of stacks depends on the current 
configuration of SW. Possible values for each stack are: 

0 : status OK, no overflow 
1 : status not OK, stack overflow, 

 
bbbbbbb 

Status of each block set before reset. First position contains the status of 
block set 1, second position the status of block set 2 and so on. Possible 
values for each block set are: 

0 : status OK 
1 : block set full 
2 : (de)allocation error or total memory corruption 

 
Note: This display is only valid when a unknown or a stack overflow interrupt has occured.

 

Содержание NetMonitor






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды