Data call page
Define the following:
•
Connection type
— Define the GSM data call type. To
use
High speed
, the service provider must support this
feature, and if necessary, activate it for your SIM card.
•
Remote modem type
— Define whether the device
uses an analog or digital connection. This setting
depends on both your GSM network operator and
Internet service provider, because some GSM networks
do not support certain types of ISDN connections. For
details, contact your Internet service provider. If ISDN
connections are available, they establish connections
more quickly than analog methods.
•
Modem speed
— This option allows you to limit the
maximum connection speed. Higher data rates may
cost more, depending on the service provider. The
speed represents the maximum speed at which your
connection will operate. During the connection, the
operating speed may be less, depending on network
conditions.
•
Modem initialisation
— You can control your device
using modem AT commands. If required, enter
characters specified by your service provider.
Script page
A script can automate the connection between the device
and the server. Contact your Internet service provider to
find out whether you need a script.
Define the following:
•
Use login script
— If you select
Yes
, you can write or
import a login script. You can edit the script in the
Login
script
field.
•
Show terminal window
— If you select
Yes
, once a
connection is established, you see the execution of the
script.
Other page
Define the following:
•
Use callback
— Select
Yes
if you have a service that
dials back to your device when you establish an
Internet connection.
•
Callback type
— Ask your Internet service provider for
the correct setting.
Server number
refers to the
standard Microsoft callback, and
Server number (IETF)
refers to a callback approved by the Internet
Engineering Task Force. Select
Number
to use a
number that you define in the
Callback number
field.
•
Callback number
— Enter the data call phone number
of your device, which the callback server uses.
•
Allow plain text login
— Select
No
, if you never want
to send your password as plain text without
encryption. Note that this option only affects PPP
connections; e-mail and Web passwords are not
encrypted. Some Internet service providers require
that this option is set to
Yes
.
•
Use PPP compression
— Select
Yes
to speed up the
data transfer, if it is supported by the remote PPP
server. If you have problems establishing a connection,
select
No
.
91
Cont
rol panel
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/zmao/3934007/ra-8_minime/en/issue_1/ra-8_minime_en_1.xml
Page 91
Sep 27, 2005 12:15:21 PM
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/zmao/3934007/ra-8_minime/en/issue_1/ra-8_minime_en_1.xml
Page 91
Sep 27, 2005 12:15:21 PM
