Data and software management
Your smartphone offers you several applications for
managing your personal data, such as contacts and
calendar information and e-mail.
Data mover
You can use
Data mover
to move certain data, such as
contacts and settings, from your Nokia 9200 series
Communicator to your Nokia 9300i with infrared or a
memory card. Before you start, make sure that there is
enough free memory in your devices or memory card for
the move. Note that if there is less than 2 MB of free
memory in the Nokia 9300i , you cannot move any data.
Do not use the Nokia 9300i when using Data mover. If
possible, switch off the cover phone. Make sure you have
enough battery power, or connect the device to a charger.
Note: Before you use an existing compatible
memory card with your Nokia 9300i, you must convert
the memory card with Data mover and reinstall the
applications that you previously installed to the memory
card. However, do not reinstall any pre-installed
applications for the Nokia 9210 Communicator. Your
Nokia 9300i contains a later version of these applications,
and these later versions must be used with Nokia 9300i.
There may be additional steps, depending on the type of
data that you want to move, the method you want to use
to move the data, the amount of free memory on your
devices or memory card, or the number of successful or
unsuccessful data moves you have made previously. Make
sure that the infrared ports of the devices are facing each
other.
Always read the instructions that Data mover provides on
the display.
1. Go to
Desk
>
Tools
>
Data mover
. If there is data on
a memory card, insert it to your Nokia 9200 series
Communicator. Press
Continue transfer
.
2. Select your current city and country, and press
OK
.
3. Activate infrared in both devices, make sure that the
infrared ports of the devices are facing each other, and
press
Continue
. An infrared connection is established
between the devices.
4. Press
Send data collector
to send Data collector to your
Nokia 9200 series Communicator. Data collector is
sent as an infrared message to the Inbox in your Nokia
9200 series Communicator. To install Data collector,
press
Open
in the 9200 series Communicator. If
Open
is not available, press
Save
to save the installation file,
and open it from File manager. Data collector starts
automatically after installation. Control the rest of the
data move process with the Nokia 9300i. After Data
collector is installed,, press
Connect data coll.
in the
Nokia 9300i.
5. In the Nokia 9300i, select the data you want to move
from your Nokia 9200 series Communicator. You can
move calendar and contact information, messages,
settings, documents, and images. Some files, such as
100
Da
ta
an
d s
of
twa
re management
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/zmao/3934007/ra-8_minime/en/issue_1/ra-8_minime_en_1.xml
Page 100
Sep 27, 2005 12:15:21 PM