INSTALLING
1000F/1100F/1800F
Mounting
External dimensions and mounting hole locations for 1000F, 1100F, and 1800F respectively:
Opening the enclosure
To access the electrical connections and the small user interface used for configuring the unit,
the steel case has to be opened. First unscrew all the screws surrounding the display, then lift
off the black steel frame and the red plexiglass. Finally unscrew the screw that is located on the
right hand side of the rightmost digit. Now the display assembly may be turned away on its
hinges.
Connections
There is two PG11 cable glands on the lower wall of the enclosure allowing the cables to be
brought in.
The large field displays are available for two supply voltage ranges, called "24VDC" and
"230VAC". Moreover, the 230VAC model may be equipped with an auxiliary power supply or
not. If the aux power supply is installed, it is completely wired on the factory, but it affects where
the power supply cable is connected in. The aux power supply is used only on certain 1800F
models.
10
455, 625, 1025
500, 670 1045
1
88
,2
5
0,
3
75
14
7,
2
1
0,
3
30
482, 650, 1030
120,130,
210
