www.noirot.com.au
7
RESETTING THE HEATER
Heaters with a software version of 2.3 or later can reset the heater to the factory defaults by
pressing and holding down the
button for 15 seconds (<<RST>> will appear on the
screen).
Default programming factory settings are as follows:
Days 1 – 5:
Period 1: On from 6am to 9am
Period 2: On from 5pm to 11pm
Days 6 & 7:
Period 1: On from 7am to 11pm
Heaters with a software version of 2.0, 2.1 or 2.2 cannot perform this function.
CHILD LOCK
Press both the
and
buttons together until the
is displayed on the screen.
This indicates that the child lock is activated, disabling the buttons on
the
keypad.
To re-activate the keypad, press both
the
and
buttons
together
until
the
key
disappears
MAINTENANCE
Your Noirot Electric Panel Heater requires very little maintenance. To remove surface dust use a
soft cloth; to remove marks use a damp cloth. Never use abrasives or metal scourers which
could damage the polyester coating. It is recommended to periodically clean the air vents using
the soft brush on your vacuum cleaner, as dense accumulation of dust will cause the heater to
over-heat and trigger the safety thermal cut-out switch.
SPECIFICATIONS:
Model
Power (W)
Current (A)
Height
A
B
C
7358-3T
1000
4.2
440
420
208
106
7358-5T
1500
6.3
440
580
178
201
7358-7T
2000
8.3
440
745
320
210
7358-8T
2400
10.0
440
900
405
248
Please note:
Heater temperature settings will vary from house to house according to the
building type and its level of insulation. They will also vary from room to room, depending on
factors such as room orientation (facing north or south) and window sizes.
Items such as
computers and lights (which generate heat) and people will also affect a room’s temperature.
Running costs are not wholly governed by the temperature setting on the panel heater. The
same maximum power is used to reach 11° or 27°. Where the energy efficiency and economy is
obtained is in the sizing of the heater to the particular room where it is to be used. If the heater
is sized correctly, then the thermostat will cycle on & off as required to maintain your comfort
level, no matter where on the scale your comfort setting is.
