6
www.noirot.com.au
No. of the
period
The Day will now be flashing.
Set the current day (i.e. 1 for Monday, 2 for Tuesday, etc.), then press
to confirm.
The time and day are now set.
To display the current time during normal operation, briefly press the
button.
The time will be displayed for 3 seconds.
PROGRAMMING THE TIMER
It is possible to set up to 3 On/Standby periods per day using the timer mode. Each day can be
programmed individually or all days can be programmed at once.
Press the
button for 2 seconds to enter the programming mode
The Day will now be blinking
Use the
and
buttons scroll to the required day. Note that after Day 7, ‘ALL’ will be
displayed. Use this setting to program every day.
Press the
button to confirm
Period 1 settings are now displayed
Use the
and
buttons to select the time that you
want the heater is to turn
ON
.
When a time is displayed a red triangle appears on the
display below
FROM
Press the
button to confirm
Use the
button to select the time that you want the
heater is to return to
STANDBY
The red triangle in now displayed below
TO
, indicating the
time the heater is set to revert to
STANDBY
mode.
Press the
button to confirm
Period 2 settings are now displayed. Repeat the above steps for Period 1 to set the times that
the heater is to turn
ON
and return to
STANDBY.
If no more On/Standby periods are required for the day, continue to
press until the Day is
again displayed.
Repeat the above steps for each day heating periods are required.
To exit to programming mode press
until the
DAY
is displayed. Press the
button
until
EXIT
is display on the display.
Press the
button to confirm to exit programming
Briefly pressing the
button when the heater is in AUTO Mode will display the time left in a
heating period or the lapsed time until the next heating period starts.
No Pr
is displayed if no
more heating periods are programmed for that day.
Note:
The temperature can be adjusted at any time during a heating period. Simply press the
or
buttons to adjust the room temperature.
