www.noirot.com.au
5
THE MR190 DIGITAL CONTROLLER
On/Standby:
Press
to turn the heater
ON
or return it to
STANDBY
Mode
Mode Selector:
The
MODE
button enables the heater to operate in the following 3 modes
(shown by the different symbols along the bottom of the display:
Mode
Display
Description
TIMER
Heater
operates only during heating
periods
COMFORT
Heater operates continuously at the set
temperature
FROST-PROTECTION
Heater operates continuously at 7°C
(frost-protection)
MANUAL HEATER OPERATION
Ensure your heater is correctly installed or mounted on castors, plugged in and turned on at the
power point on.
Press
to turn the heater ON and ensure the mode is set to COMFORT.
Use the
and
buttons to set the required room temperature.
The temperature is
increased or decreased in 0.5°C increments and ranges from 11°C to a maximum of 27°C.
The
symbol on the display indicates that the element is energised. Once the room
temperature has stabilised, the heating element will cycle on and off to maintain the room
temperature.
Press
to return the heater to STANDBY mode
SETTING THE TIME
Press the
button.
Press the
button for 2 seconds to enter the programming mode
The Day will now be blinking
Press the
button again, this time for 3 seconds to enter the time setting mode
The Hour will now be flashing
Use the
and
buttons to set the current hour, then press
to confirm
The Minutes will now be flashing.
Use the
and
buttons to set the current hour, then press
to confirm
On/Standby
Mode Selector
Increase
Decrease
Program
