background image

4

www.noirot.com.au

RECOMMENDATION FOR USE WITH CASTORS

This heater is tested and approved for use with the optional “Easy Glide Castors”. Please follow
the fitting instructions (supplied with the castors) closely, ensuring the

BLACK CLIPS

are

correctly installed. Note that once the

BLACK CLIPS

are fixed into position, the castors

CANNOT

be removed without breaking them.

WARNING:

DO NOT use the heater on the floor without the “Easy Glide Castors”.

ELECTRICAL CONNECTION

This heater is fitted with an Australian Approved Flexible Cord and Plug. For wall-mounted
installations connection can be either by plugging into an existing 10 amp power point (DIY) or
direct wired by a Licensed Registered Electrical Contractor, who is required to issue a Certificate
of Electrical Safety.

PLEASE NOTE:

For safety reasons the Flexible Cord must not be modified or repaired in any

way. If the Cord is damaged, it must be replaced by a Noirot appointed and approved service
agent. If there are any concerns, contact Noirot Australia Pty Ltd on 1 300 664 768 before
plugging it in.

IMPORTANT:

DO NOT plug heater into a Power Board, Double Adaptor or Extension
Lead.

USING YOUR HEATER FOR THE FIRST TIME

Remove the heater from its packaging (please dispose of packaging responsibly).
Contents should be as follows:

1.

Heater

2.

Wall bracket (pre-attached to the back of the heater)

3.

Instructions for installation and use (8 page booklet)

Ensure the heater is correctly mounted on the wall or fitted to the castors prior to turning it on.
Remove the white plastic protective covers from the plug pins and insert the plug into the wall
socket.

This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance.
NOTE:

When the heater is turned on for the first time, or after it has been off for a long period,

such as during the summer months, you may experience a slight burning smell. This is quite
common and should disappear after a few minutes. If it should persist, switch the heater off and
have it inspected.

Содержание 7358-3T









Отзывы: