2
www.noirot.com.au
RECOMMENDATION FOR WALL INSTALLATION
This heater is sold ready for DIY installation, with Wall bracket and flexible cord supplied. To
remove the wall bracket from the heater you need to push down on the spring loaded clips
located at the top of the bracket. This can be done by using your fingers or, if preferred, a
screwdriver (No: 1 Fig.1). Fit the wall bracket to the wall with suitable fixing method according to
the surface you mount the heater on (not included). Place the heater on to the bracket and clip
into position.
Note:
To centre your appliance laterally on the wall, use the hole marked
2
.
Model
Height
A
B
C
7358-3T
440
420
208
106
7358-5T
440
580
178
201
7358-7T
440
745
320
210
7358-8T
440
900
405
248
The heater must not be located immediately below a socket outlet (as per requirement of
Clause 7.12 of AS/NZS 60335.2.30).
Fig. 1
