Noggin 1000 Smart Cart, Руководство пользователя

Страница: 39 / 119

Smart Systems User’s Manual Version 1.1
25
Canon BubbleJet printers can usually be configured to emulate an Epson and most HP
printers will work using the Laser driver.
Figure 5-3: Attaching a printer to the DVL using a standard printer cable.
On the back of the DVL there is a standard 25 socket parallel port. A printer can be
attached to the parallel port on the DVL with a standard printer cable, just as you would
attach a printer to any computer (Figure 5-3).
Always power down the DVL before attaching a printer. This will prevent damage
to the parallel port.
On the Digital Video Logger, after the Print option is selected, the user must define the
section to be printed. The left edge of the page must be established first. This is done by
lining up the left edge of the Digital Video Logger screen with the edge of the plot
desired. Use the arrow buttons on the screen to move the section back and forth (Figure
4.1). A single arrow moves the image 8 pixels either right (
), or left ( ). A double
arrow will move the image 640 pixels or 1 full page to the right ( ) or left ( ). A single
arrow with a vertical line will move the section either to the start (
❙
), or end (
❙
) of the
section. If the start or end of section button is pressed, the image will page through one
screen at a time. Data scrolling can be stopped by pressing any button. Once the left
edge is in place, pressing the OK button will lock the left edge of the plot.
Figure 5-4: Noggin Print Screen