manualshive.com logo in svg

Noggin 1000 Smart Cart, Руководство пользователя

"Умная тележка Noggin 1000 - это идеальное решение для вашего умного дома. Скачайте бесплатное руководство пользователя на manualshive.com и настройте свою тележку для оптимального использования. Управляйте своим умным домом легко и удобно с помощью Noggin 1000 Smart Cart."

Поделиться
Скачать
background image

 

Smart Systems User’s Manual Version 1.1 

 iii 
 

Information on pulseEKKO, Noggin and Conquest Products Regarding 

Electromagnetic Emissions 

Emissions

 

All governments have regulations on the level of electromagnetic emissions that an 
electronic apparatus can emit. The objective is to assure that one apparatus or device 
does not interfere with any other apparatus or device in such a way as to make the other 
apparatus non-functional.

 

Sensors & Software Inc. have extensively tested their pulseEKKO, Noggin and 
Conquest subsurface imaging products using independent testing houses and comply 
with the regulations of the USA, Canada, European Community and other major 
jurisdictions on the matter of emissions.

 

Not all electronic devices have been designed for interference immunity.  When placed 
in close proximity to another device interference may occur. There has never been a 
report of interference from GPR products to date.  If you observe unusual behavior on 
nearby devices while you are operating a pulseEKKO, Noggin or Conquest product, 
immediately turn off the product.  You can test the cause and affect between the product 
and the device if the disturbance starts and stops when the product is powered up and 
shut off.  If interference is confirmed, stop using the product.

 

Immunity

 

Immunity regulations place the onus on instrument/apparatus/device manufacturers to 
assure that extraneous interference will not unduly cause an 
instrument/apparatus/device to stop functioning or to function in a faulty manner.

 

Based on independent testing house measurements, Sensors & Software Inc. systems 
comply with such regulations in Canada, USA, European Community and most other 
jurisdictions. One must remember that Sensors & Software Inc.’s products are designed 
specifically to sense electromagnetic fields.  External sources of electromagnetic fields 
such as TV stations, radio stations and cell phones, can cause detectable signals that 
may degrade the quality of the data that the products record and display.

 

Such interference is unavoidable but sensible survey practice and operation by an 
experienced practitioner can minimize such problems. In some geographic areas 
emissions from external sources may be so large as to preclude useful measurements. 
Such conditions are readily recognized and accepted by the professional geophysical 
community as a fundamental limitation of geophysical survey practice.

 

Health

 

The interaction of electromagnetic fields with humans is an evolving field of 
epidemiology although one which creates sensational press headlines. Humans are 
immersed daily in a sea of electromagnetic fields which cover a wide range of 
frequencies. Systematic correlation between EM fields and human illness have only 
been reported at very high powers (millions of times greater than any Sensors & 
Software Inc. product) for military radar systems operating in the 5000 to 20,000 MHz 
range where physical burning/heating (basically like a microwave oven) have been 
reported.

 

Содержание 1000 Smart Cart
























































































































Отзывы:

Нет отзывов

Похожие инструкции для 1000 Smart Cart

Hama Badradio SR-300 Operating Instruction preview
Badradio SR-300
Бренд: Hama Страницы: 3
Yaesu FTM-100DR Update Instruction Manual preview
FTM-100DR
Бренд: Yaesu Страницы: 13
Radio Shack iSCAN PRO-18 User Manual preview
iSCAN PRO-18
Бренд: Radio Shack Страницы: 48
EDIFIER TickTock MF240 User Manual preview
TickTock MF240
Бренд: EDIFIER Страницы: 6
Vertex Standard VXR-7000 Operating Manual preview
VXR-7000
Бренд: Vertex Standard Страницы: 44
BTECH GMRS-PRO Manual preview
GMRS-PRO
Бренд: BTECH Страницы: 71
Icom IC-2710H Service Manual preview
IC-2710H
Бренд: Icom Страницы: 70
Albrecht Audio DR 890 CD Manual preview
DR 890 CD
Бренд: Albrecht Audio Страницы: 144
Albrecht DR 460 C User Manual preview
DR 460 C
Бренд: Albrecht Страницы: 12
Albrecht AE6491 Service Manual preview
AE6491
Бренд: Albrecht Страницы: 12
Albrecht AE-5890 EU Quick Start Manual preview
AE-5890 EU
Бренд: Albrecht Страницы: 2
Albrecht AE 6890 Repair & Adjustment Hints preview
AE 6890
Бренд: Albrecht Страницы: 6
Albrecht DR 422 Manual preview
DR 422
Бренд: Albrecht Страницы: 96
Albrecht AE2990 AFS Service Manual preview
AE2990 AFS
Бренд: Albrecht Страницы: 14
Albrecht 27462 Manual preview
27462
Бренд: Albrecht Страницы: 84
Roadstar CLR-2950DAB+ Instruction Manual preview
CLR-2950DAB+
Бренд: Roadstar Страницы: 12
Radiodetection RD1000 Operation Manual preview
RD1000
Бренд: Radiodetection Страницы: 46
camry CR 1183 User Manual preview
CR 1183
Бренд: camry Страницы: 72

Бренды по названию

Популярные бренды

Загрузить еще бренды