Nobles STRIVE RIDER, Руководство оператора

Страница: 24 / 109

OPERATION
24
Nobles Strive Rider (09--06)
2. Clean the batteries and terminals to prevent battery
corrosion. Use a scrub brush with a mixture of
baking soda and water (Figure 63).
ATTENTION: Do not allow the baking soda solution
to enter the batteries.
FIG. 63
3. Check for loose or worn battery cables. Replace if
worn.
PRIMING SOLUTION SYSTEM
To prime the machine’s solution system, operate the
ReadySpace technology for approximately one minute
(Figure 64). Once primed, the machine can be used for
restorative extraction cleaning.
If the solution system is completely dry or if you notice
center streaking when restorative extraction cleaning,
the solution system must be primed.
FIG. 64
MACHINE JACKING
Use the designated jacking locations for jacking up the
machine (Figure 65). Empty the recovery and solution
tanks before jacking. Use a jack capable of supporting
the weight of the machine. Position the machine on a
flat, level surface and block the tires before jacking.
FOR SAFETY: When servicing machine, jack
machine up at designated locations only. Use jack
or hoist that will support machine weight. Block
machine up with jack stands.
FIG. 65
PUSHING, TOWING, AND TRANSPORTING
MACHINE
PUSHING OR TOWING THE MACHINE
Before attempting to push or tow the machine, the
brake must be disengaged. To disengage the brake,
insert a small standard screwdriver between the
electronic brake lever and the hub (Figure 66).
FOR SAFETY: When brake is disengaged, do not
push or tow the machine on inclines.
FOR SAFETY: When brake is disengaged, do not
operate machine.
FIG. 66