Nobles STRIVE RIDER, Руководство оператора

Страница: 12 / 109

OPERATION
12
Nobles Strive Rider (03--09)
3. Position the directional lever in the direction you
want to move (Figure 16). The horn will beep
repeatedly when moving backwards.
NOTE: During ReadySpace cleaning, the machine will
continue to clean in reverse. This allows you to back
track over heavily soiled areas. During extraction
cleaning, the vacuum shoes will rise when in reverse.
FORWARD
REVERSE
FIG. 16
4. To begin cleaning, press the propel pedal
(Figure 17). The speed is controlled by the amount
of pressure applied to the pedal.
FIG. 17
5. For heavily soiled areas, press the brush pressure
button to the (+) setting (Figure 18).
FIG. 18
6. For high productivity, press the speed selection
button to the (+) setting. For best cleaning results,
use the standard (--) default setting (Figure 19).
FIG. 19
7. During restorative extraction cleaning, the solution
flow can be turned off as needed (Figure 20).
This allows the operator to:
-- Recover the solution at the end of a path.
-- Turn 180
°
without leaving solution on the floor.
-- Double scrub areas without adding more solution.
-- Pick up water spills.
FOR SAFETY: When operating machine near hard
floor surfaces, place “WET FLOOR” signs as
needed.
FIG. 20
8. To stop the machine, position the machine on a
level surface and release the propel pedal (Figure
21). The machine will automatically engage the
parking brake.
FIG. 21