Nobles STRIVE RIDER, Руководство оператора

Страница: 15 / 109

OPERATION
Nobles Strive Rider (12--06)
15
FAULT INDICATOR LIGHT/BEEP CODES
The fault indicator light will come on or the horn will beep if the machine detects a fault.
Use the following fault codes to determine cause of fault.
1
2
3
4
5
6
Fault indicator light
REF. FAULT LIGHT CODE FAULT SOLUTION
1 Fault light blinks Propel motor overload
Exceeded maximum incline
Avoid steep inclines. Restart key
to reset. Contact Service Center.
1 & 2 Fault light and Speed (+) light
blink
Rear brush motor overload Inspect brush for obstruction.
Contact Service Center.
1 & 3 Fault light and Solution light blink Front brush motor overload Inspect brush for obstruction.
Contact Service Center.
1 & 4 Fault light and Extract light blink Vacuum motor overload Contact Service Center.
1 & 5 Fault light and Brush pressure (+)
light blink
Scrub head actuator overload Contact Service Center.
1 & 6 Fault light and Brush pressure (--)
light blink
Extractor shoe actuator overload Contact Service Center.
FAULT BEEP CODE FAULT SOLUTION
Horn repeatedly beeps two times Propel pedal depressed without
operator in seat
Operator must be seated to operate
machine
Horn repeatedly beeps four times Key switch turned on with propel
pedal depressed
Release propel pedal before turning
key on
Horn repeatedly beeps five times Throttle system failure Contact Service Center
Horn repeatedly beeps six times Brake system failure Contact Service Center
Horn repeatedly beeps seven times Parking brake system failure Contact Service Center
Horn repeatedly beeps eight times Emergency stop button activated Turn button clockwise and restart key
to reset
Horn repeatedly beeps nine times Key switch turned on with battery
charger plugged into machine
Unplug battery charger before start-
ing machine