Nobles STRIVE RIDER, Руководство оператора

Страница: 10 / 109

OPERATION
10
Nobles Strive Rider (09--06)
MACHINE SETUP
PREPARING MACHINE FOR READYSPACE
CLEANING
1. Park the machine on a level surface and remove
the key. Make sure the scrub head is in the raised
position.
2. Remove the idler plates from the scrub head
(Figure 6).
Idler plate
FIG. 6
3. Install the ReadySpace rollers and re-fasten the
idler plates (Figure 7).
ReadySpace
Rollers
FIG. 7
4. Connect the green ReadySpace vacuum hose to
the recovery intake connector (Figure 8).
Green Hose --
ReadySpace
Cleaning
FIG. 8
PREPARING MACHINE FOR RESTORATIVE
EXTRACTION CLEANING
FIRST TIME USE: See PRIMING SOLUTION
SYSTEM on page 24.
1. Park the machine on a level surface and remove
the key. Make sure the scrub head is in the raised
position.
2. Remove the idler plates from scrub head
(Figure 9).
Idler plate
FIG. 9
3 Install the extraction brushes and re-fasten the idler
plates (Figure 10). NOTE: The brush end with the
letter “ I ” indicates idler plate end. The “I” should
face outward.
“ I ”
Idler
plate
end
Extraction
Brushes
FIG. 10
4. Connect the blue extraction vacuum hose to the
recovery intake connector (Figure 11).
Blue Hose --
Extraction
Cleaning
FIG. 11