Nobles Speed Scrub Rider Скачать руководство пользователя страница 31

Страница: 31 / 54

MAINTENANCE

SpeedScrub Rider 331140 (9- 2013)

CHARGING THE BATTERIES WITH

OFF- BOARD CHARGER

IMPORTANT: Before charging, make sure that

the battery charger setting is properly set for

the battery type (Refer to charger’s owners

manual).

1. Drive the machine to a flat, dry surface.

NOTE: Make sure the area is well ventilated.

2. Turn the machine

ON/OFF key switch

off.

FOR SAFETY: Before leaving or servicing

machine, stop on level surface, turn off

machine, and remove key.

3. Tilt the operator seat forward and hook the

seat latch into place to hold up the seat

NOTE: Make sure the batteries have the proper

electrolyte level before charging. See CHECKING

THE ELECTROLYTE LEVEL.

4. Plug the charger connector into the machine

battery charging connector.

WARNING: Batteries emit hydrogen gas.

Explosion or fire can result. Keep

sparks and open flame away. Keep

covers open when charging.

5. Plug the battery charger into the wall outlet.

NOTE: If the red “ABNORMAL CYCLE” lamp

lights when the TENNANT charger is plugged into

a wall outlet, the charger cannot charge the

battery and there is something wrong with the

battery.

07224

6. The TENNANT charger will start

automatically. When the batteries are fully

charged, the TENNANT charger will

automatically turn off.

NOTE: Do not disconnect he charger’s DC cord

from the machine’s battery charging connector

when the charger is operating. Arcing may result.

If the charger must be interrupted during charging,

disconnect the AC power supply cord first.

7. After the charger has turned off, unplug the

charger from the machine battery charging

connector.

8. Unhook the seat latch and lower the operator

seat.

Содержание Speed Scrub Rider























































Результаты поиска

Содержание Speed Scrub Rider

Отзывы:

Похожие инструкции для Speed Scrub Rider

Бренды по названию

Популярные бренды

Nobles Speed Scrub Rider, Руководство оператора

Результаты поиска

Содержание Speed Scrub Rider

Отзывы:

Похожие инструкции для Speed Scrub Rider

Бренды по названию

Популярные бренды