OPERATION
Quick Clean
1500 (03–00)
9
FIG. 11
NOTE: To operate spray gun at LOW PRESSURE
without the use of Formula cleaner, turn FORMULA
ON/OFF lever to the OFF position.
4.
Adjust gun to low pressure by pushing spray
nozzle outward. Turn spray nozzle counter–
clockwise for fan spray pattern (Figure 12).
FIG. 12
5.
Activate pump switch. Press vacuum/blower
switch towards vacuum symbol if using gulper tool
(Figure 13).
FIG. 13
6.
Starting at the furthest point in room, begin spraying
entire area from bottom to top working towards
machine. The cleaning agent (Formula 710) may
take up to 5 seconds before it starts to inject. After
spraying entire area, turn machine off and allow
cleaner to work for 5–10 minutes (Figure 14).
FIG. 14
NOTE: It may take pump 5–10 seconds to prime.
Nozzle must be set at low pressure in order for pump
to prime.
FOR SAFETY: When using machine, do not spray
solution into electrical outlets, switches, fuse
boxes or on electrical appliances.
NOTE: After applying cleaner, turn the FORMULA
ON/OFF lever to the OFF position and rinse gun of
cleaning formula.
7.
While the cleaning solution is working, use the
brush tool to scrub corners, cove base and heavily
soiled areas (Figure 15).
FIG. 15
