OPERATION
6
Quick Clean
1500 (04–00)
UNPACKING MACHINE
Carefully check carton for signs of damage. Report
damages to carrier immediately.
Check Carton Contents to ensure carton is complete.
Contact distributor for missing items.
Carton Contents:
–
Machine
–
Black Vacuum Hose
–
Gray Blower Hose
–
Two Piece Double Bend Wand
–
(14 in) Squeegee Tool Attachment
–
Glass Squeegee Hand Tool
–
Gulper Tool
–
Blower Nozzle
–
Fill Hose
–
Spray Gun, Spray Nozzle and Solution Hose
–
Floor Brush Attachment
–
Telescoping Wand for Floor Brush
–
One Gallon of Formula 710 Acid Cleaner
–
One Gallon of Formula 720 Multi–Surface Rinse
–
3 Metering Tips (bagged separately)
–
Injector Tube Cap (Installed on blue tube)
–
Grease Gun for Pump
PREPARING MACHINE FOR CLEANING
APPLICATION
INSTALLING LIQUID CLEANING AGENT
(FORMULA 710) CONTAINER
Each new machine is equipped with a one gallon
(3.8L) sample of Formula 710 Multi–Surface Acid
Cleaner. It is designed for use in this machine, and is
specifically formulated to clean soap scum, hard water
scale, and soils typically found in restrooms, showers,
swimming pool areas, etc. Use only on water–resistant
surfaces. To order additional Formula 710, contact
your supplier.
ATTENTION: Use of unapproved or inappropriate
chemicals may cause damage to machine and
surfaces and could void your warranty
FOR SAFETY: When using machine, follow
mixing, handling, and disposal instructions
provided on chemical container instructions and
MSDS sheets.
1.
Remove cap from the blue injector tube. Do not
misplace cap (Figure 1). Use cap to prevent injector
tube from clogging when machine is not in use.
FIG. 1
2.
Select the desired metering tip (Tips supplied with
machine) and thread tip into blue injection tube on
machine (Figure 2). Dispensing rates shown are
for Formula 710. Substitute chemicals may have
different dispensing rates. An orange tip is factory
installed.
Orange Tip= 2 oz. per gallon (15ml./L)
for light cleaning
Red Tip= 4 oz. per gallon (30ml./L)
for medium cleaning
Blue Tip= 6 oz. per gallon (44ml./L)
for heavy cleaning.
FIG. 2
3.
Place the cleaning agent container into the
accessory tools/cleaning formula compartment.
Remove cap from container and attach blue
injector tube cap. Push blue tube to bottom of
container (Figure 3).
FIG. 3
ATTENTION: Do not add cleaning chemicals
(Formula 710) to the solution tank.
