OPERATION
Quick Clean
1500 (03–00)
11
ATTENTION: Do not use black recovery hose
when blow drying. Contaminates will be blown
into the air.
FIG. 21
3.
Press vacuum/blower switch towards blower
symbol to activate blower (Figure 22).
FIG. 22
4.
Begin blow drying surfaces from top to bottom,
pushing rinse solution to floor. When finished, shut
off blower, wipe off hose and replace it on machine
(Figure 23).
FIG. 23
5.
Assemble the double–bend wand, attach
squeegee tool and connect wand to black
recovery hose. Connect black recovery hose at
front of machine (Figure 24).
FIG. 24
6.
Press vacuum/blower switch towards vacuum
symbol (Figure 25).
FIG. 25
7.
Start at doorway and extract entire area with floor
squeegee. Operator should always be standing on
a dry surface when operating floor wand
(Figure 26).
FIG. 26
WARNING: Flammable materials or reactive
metals can cause an explosion or fire. Do not pick
up.
